Select the desired reticle by turning the reticle selector knob and set the intensity to a level that is most comfortable for you. 2. With the sight securely mounted,
MOUNTING YOUR RED DOT SCOPE. UNITS WITH RING MOUNTS: As there is no set eye relief for Red-Dot scopes, please allow a minimum of three inches of
Multi Reticle Electro Sight with Red Laser. Parts of the Windage Adjustment. 7. elevation adjustment screws located in the laser body, move the laser dot.
ATTENTION: THIS BARSKA LASER SIGHT IS A POWERFUL TARGETING Sight through the red-dot and use the windage and elevation adjustments to align
Parts of the Multi-Reticle IR, Electro Sight. 1. The Windage Adjustment (4) is located on the side of the sight. This ELECTRO SIGHT / RED DOT. BARSKA® Optics, as manufacturer, warrants this new precision optical product to be free.
Mounting. As there is no set eye relief for the Red-Dot scope, please allow a minimum of three inches of space between the eyebell and the shooter’s eye, when
Set scope zoom to the max power, and adjust the windage and elevation The black mil-dot illuminates to red for low light targeting or green for daylight BARSKA® Optics, as manufacturer, warrants this new precision optical product to.
19 products The English user manual for red dot/holographic sights Barska can usually be downloaded from the manufacturer’s website, but since that’s not
Misplace your owner’s manual? Individual Barska product manuals are available for viewing below. First select a product category, and then locate the product
Manual for Barska AC11322 red dot scope Is there a manual for this scope setup – Barska 4×28 Ir Electro Sight Multi question. 696 797 345 747 44